for Xbox 360


Universal Remote Control


  Go to www.smklink.com
Overview Wizard Manual FAQ Support

Set TV as Punch Through Master


To set your TV as the Punch Through Master complete the following steps:
(By default, your TV should already have been set as punch through master. These steps are only needed if the Punch Through Master was set to another device such as AUX.)

  Step 1: Enter setup mode by holding the TV button down for 3 seconds. After 3 seconds all of the device buttons will blink to confirm that you are in setup mode.  
  Step 2: Press the Mute key and now volume commands will be routed to your TV set.  
  Optional: You may want to still have the ability to independently turn the volume up and down for your Surround Sound System. Do do this, turn punch through off for your Surround Sound System.  

If you have completed these steps and punch through is not working as your expect, please visit TV Repair Instructions.

Back to Punch Through Wizard








©2009 SMK-Link Electronics, Inc. SMK-Link Logo, X-Link, X-Link and SMK-Link are trademarks of SMK-Link Electronics Corporation. Microsoft, Windows Media Center Extender, Xbox and Xbox 360 are trademarks or registered trademarks of Microsoft Corporrk or registered trademark of Bluetooth SIG Inc. All other trademarks are trademarks or registered trademarks of their respective holders.