for Xbox 360


Universal Remote Control


  Go to www.smklink.com
Overview Wizard Manual FAQ Support

Four-Digit Setup


Step 1:

Turn on the device you wish to program into your X-Link™ remote using the remote that came with that device.


Step 2:

Get the four-digit code for your device:


Step 3:

Enter setup mode by holding the device button down for approximately 3 seconds. After 3 seconds all of the device buttons will blink to confirm that you are in setup mode.



You have 10 seconds to perform each of these steps. If
you do not finish within 10 seconds, the device button light
will turn off and setup mode will be exited. You will then need
to start over.


Step 4:

Enter the four-digit code.

What happened?

The device button light turned off
The device button flashed 4 times then turned off







©2009 SMK-Link Electronics, Inc. SMK-Link Logo, X-Link, X-Link and SMK-Link are trademarks of SMK-Link Electronics Corporation. Microsoft, Windows Media Center Extender, Xbox and Xbox 360 are trademarks or registered trademarks of Microsoft Corporrk or registered trademark of Bluetooth SIG Inc. All other trademarks are trademarks or registered trademarks of their respective holders.